Hypatec (PAU180040401H) +040 Pistons Set Of 4

Hypatec (PAU180040401H) +040 Pistons Set Of 4

$270.53 /SE4
Description

020 030 040 060 (set of 4) Rings not included Use PR1338 piston rings Short skirt design (circlip pin) Compression height 1.658¨ -0.148¨

This engine part suits the Austin 1800 (Mark 1) with a 1800 engine.

Brand
Hypatec
Part Code
PT4RW23804-0040
Category
Pistons
On Hand Qty
21
Delivery
Australia Wide

Quantity:

Detail

Hypatec (PAU180040401H) +040 Pistons Set Of 4

020 030 040 060 (set of 4) Rings not included
Short skirt design (circlip pin)
Compression height 1.658¨ -0.148¨

This engine part suits the Austin 1800 (Mark 1) with a 1800 engine.

Specifications

Overview

Hypatec® is a high quality performance piston. Hypatec® pistons are all manufactured from 11-13% silicon alloy combined with T6 heat treatment to create a piston that is stronger than many other pistons. Plus, every Hypatec® piston is manufactured utilising state of the art CAD/CNC diamond tipped machinery. The end result being a piston that can withstand the severe loads associated with today’s performance engines.

High silicon alloy is the preferred material for most cast pistons because it provides greater strength and greater scuff and seizure resistance. The silicon acts as small insulators, repelling the heat created in the combustion chamber, allowing the combustion chamber to retain its heat, creating a more efficient combustion process while the piston actually runs cooler.

Hypatec® pistons are heat treated using the T6 heat treatment process. This is a specialist process which is performed in two stages. During the first stage the piston is heated to 500°C for 9 hours and then water quenched to create a single phase alloy. The second stage involves heating the piston to 180°C for 10 hours and then allowing it to air cool. As a result, the alloy hardens to form a copper aluminium crystal, CuAI2. It is the formation of these crystals that give the alloy its strength.

Hypatec® pistons are manufactured by original equipment piston manufacturers. Because Hypatec® pistons are developed directly from the needs of engine manufacturers, the latest design features are used in many Hypatec® pistons. These developments include; anodizing, alfin inserts, ceramic fibre squeeze casting and gallery cooling. They are all original equipment developments and are included in the Hypatec® piston range for the aftermarket.

Hypatec® pistons can be purchased with cast, chrome or moly Hastings® piston rings and are available to suit a full range of American, Australian, British, Japanese and Korean applications.

Suitable For

Austin
1800 (Mark 1) 1800
1800 (Mark 2) 1800
MG
MGB 1800 (5 Mains)
MGB GT 1800 (5 Mains)